topic VPN mesh configuration with Remote Site in Network Security

VPN mesh configuration with Remote Site

fregon — Fri, 21 Feb 2020 07:22:50 GMT

Hello,

My current scenerio is 4 sites (A,B,C,D). In site A there is frame relay connection to another site (site y). All sites, A,B,C & D access Site y through Site A. I think I have the VPN configuration down for 4 sites in a mesh configuration. The only thing I'm still trying to figure out is the routing from Sites B, C & D to Site y. Can anyone help me how I will define this on the PIX????

Thank you!

Re: VPN mesh configuration with Remote Site

a-vazquez — Tue, 11 May 2004 14:22:43 GMT

The Pix will not route traffic out of the same interface that it is received on. Spoke to spoke communications cannot occur with the PIX.

Re: VPN mesh configuration with Remote Site

fregon — Tue, 11 May 2004 15:36:26 GMT

I'm not sure I explained correctly. The traffic to site y will be traffic from each of the sites B,C,D. In other words I need to find out how to route traffic that initiates in site B to go to site y that exists in Site A. Site A,B,C & D are in a mesh configuration, but site A has a frame relay connection to site y which needs to be accessed from sites B,C & D.