topic Default IP Echo - Packet Priority in Network Security https://community.cisco.com/t5/network-security/default-ip-echo-packet-priority/m-p/242188#M1060163 <P>Hi,</P><P>I have CiscoWorks RWAN with IPM. I would like to measure the Round-Trip Latency using the DefaultIPEcho. I do not know if shall I keep the Packet Priority to Default (0) or higher. If anyone can help me out and explains the differences.</P><P></P><P>Your help is appreciated.</P><P>Regards,</P><P></P> Fri, 21 Feb 2020 07:16:42 GMT admin_2 2020-02-21T07:16:42Z Default IP Echo - Packet Priority https://community.cisco.com/t5/network-security/default-ip-echo-packet-priority/m-p/242188#M1060163 <P>Hi,</P><P>I have CiscoWorks RWAN with IPM. I would like to measure the Round-Trip Latency using the DefaultIPEcho. I do not know if shall I keep the Packet Priority to Default (0) or higher. If anyone can help me out and explains the differences.</P><P></P><P>Your help is appreciated.</P><P>Regards,</P><P></P> Fri, 21 Feb 2020 07:16:42 GMT https://community.cisco.com/t5/network-security/default-ip-echo-packet-priority/m-p/242188#M1060163 admin_2 2020-02-21T07:16:42Z Re: Default IP Echo - Packet Priority https://community.cisco.com/t5/network-security/default-ip-echo-packet-priority/m-p/242189#M1060165 <HTML><HEAD></HEAD><BODY><P>you can put it to zero</P></BODY></HTML> Thu, 11 Mar 2004 15:37:03 GMT https://community.cisco.com/t5/network-security/default-ip-echo-packet-priority/m-p/242189#M1060165 sirpa_k 2004-03-11T15:37:03Z