topic Re: Web interface to config PIX in Network Security https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226505#M1060188 <HTML><HEAD></HEAD><BODY><P>The following commands should be issued.</P><P>http server enable</P><P>http (ip address of workstation pdm is to be used from) 255.255.255.255 inside</P><P>pdm location (ip address of workstation pdm is to be used from) 255.255.255.255 inside</P><P></P><P>That hoepfully should get you working.</P></BODY></HTML> Wed, 24 Mar 2004 13:09:46 GMT rdash 2004-03-24T13:09:46Z Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226500#M1060183 <P>IS there any web interface to config PIX??</P><P>Thx ^^</P> Fri, 21 Feb 2020 07:16:05 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226500#M1060183 logintck 2020-02-21T07:16:05Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226501#M1060184 <HTML><HEAD></HEAD><BODY><P>Sure, PIX Device Manager (PDM) has been around for quite a while now. If you have a recent PIX the software should already be installed, especially on the 501/506 line. Do a "sho ver" and if the second line of output says "PIX Device Manager ...." then the software is already there.</P><P></P><P>If not, you can get the software from here:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/cgi-bin/tablebuild.pl/pix" target="_blank">http://www.cisco.com/cgi-bin/tablebuild.pl/pix</A></P><P></P><P>and read the install notes here:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pdm/index.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pdm/index.htm</A></P><P></P><P>Have fun.</P></BODY></HTML> Wed, 03 Mar 2004 01:05:54 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226501#M1060184 gfullage 2004-03-03T01:05:54Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226502#M1060185 <HTML><HEAD></HEAD><BODY><P>Thx Reply</P><P>I check my PIX, PDM (1.1.2) has been installed before</P><P>but how to access it by web? ( After I read the note, I don't understand)</P><P>Thx ^^</P></BODY></HTML> Wed, 03 Mar 2004 01:33:34 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226502#M1060185 logintck 2004-03-03T01:33:34Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226503#M1060186 <HTML><HEAD></HEAD><BODY><P>in your web browser "<A class="jive-link-custom" href="http://ip" target="_blank">http://ip</A> address of pix inside interface" or change inside interface to management interface if you have one. I would suggest upgrading the pix OS and PDM two different downloads. </P></BODY></HTML> Thu, 18 Mar 2004 14:51:03 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226503#M1060186 rdash 2004-03-18T14:51:03Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226504#M1060187 <HTML><HEAD></HEAD><BODY><P>I have tried to <A class="jive-link-custom" href="https://Interal" target="_blank">https://Interal</A> IP of PIX</P><P>but fail</P><P>I need to enable http?</P><P>&gt; http server enable</P><P></P><P>THX </P></BODY></HTML> Wed, 24 Mar 2004 12:48:31 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226504#M1060187 logintck 2004-03-24T12:48:31Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226505#M1060188 <HTML><HEAD></HEAD><BODY><P>The following commands should be issued.</P><P>http server enable</P><P>http (ip address of workstation pdm is to be used from) 255.255.255.255 inside</P><P>pdm location (ip address of workstation pdm is to be used from) 255.255.255.255 inside</P><P></P><P>That hoepfully should get you working.</P></BODY></HTML> Wed, 24 Mar 2004 13:09:46 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226505#M1060188 rdash 2004-03-24T13:09:46Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226506#M1060189 <HTML><HEAD></HEAD><BODY><P>Thx!! It works now</P><P>pdm location (ip address of workstation pdm is to be used from) 255.255.255.255 inside &lt;= what is that mean??</P><P></P><P></P></BODY></HTML> Wed, 24 Mar 2004 15:25:27 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226506#M1060189 logintck 2004-03-24T15:25:27Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226507#M1060190 <HTML><HEAD></HEAD><BODY><P>In pdm 3.0(1) another command is added that is pdm location that addresses locations where pdm is available from. the mask 255.255.255.255 means only this address and only the inside interface.</P></BODY></HTML> Wed, 24 Mar 2004 18:21:20 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226507#M1060190 rdash 2004-03-24T18:21:20Z Re: Web interface to config PIX https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226508#M1060191 <HTML><HEAD></HEAD><BODY><P>use <A class="jive-link-custom" href="https://" target="_blank">https://</A><IPADDRESS or="" dnsname=""></IPADDRESS></P><P>There is no auto-redirect to the secure page.</P><P></P><P>Jon</P></BODY></HTML> Thu, 25 Mar 2004 15:26:36 GMT https://community.cisco.com/t5/network-security/web-interface-to-config-pix/m-p/226508#M1060191 jgwiesner 2004-03-25T15:26:36Z