topic Re: 3005 tp Pix Problem in Network Security https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248247#M1060281 <HTML><HEAD></HEAD><BODY><P>I guess first off make sure you've followed the sample config to the letter:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml</A></P></BODY></HTML> Thu, 01 Jan 2004 23:20:41 GMT gfullage 2004-01-01T23:20:41Z 3005 tp Pix Problem https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248246#M1060279 <P>Hi All..</P><P>Am trying to setup a remote site using a Pix506e on the remote end and a 3005 Concentrator at the headend. I am getting an error on the pix that says "VPN Peer: ISAKMP: No remote peer info for 12.109.169.12/500 - peer:0" That IP address is the 3005 and is listed in the crypto map set peer statement on the pix. debug shows that an IKS tunnel is created but not the IPSEC tunnel. I have a rapidly approcahing deadline so any thoughts are helpful.</P><P></P><P>TIA</P><P>Ron...</P> Fri, 21 Feb 2020 07:10:48 GMT https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248246#M1060279 rserao 2020-02-21T07:10:48Z Re: 3005 tp Pix Problem https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248247#M1060281 <HTML><HEAD></HEAD><BODY><P>I guess first off make sure you've followed the sample config to the letter:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml</A></P></BODY></HTML> Thu, 01 Jan 2004 23:20:41 GMT https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248247#M1060281 gfullage 2004-01-01T23:20:41Z Re: 3005 tp Pix Problem https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248248#M1060283 <HTML><HEAD></HEAD><BODY><P>That was the example we had tried. Copied it exactly... still got the errors. Becuse of the deadline we were facing we moved to a different solution but thanks for your help. We'll be trying this configuration again at a later date.. Hopefully we'll have more luck then.</P></BODY></HTML> Mon, 05 Jan 2004 02:20:03 GMT https://community.cisco.com/t5/network-security/3005-tp-pix-problem/m-p/248248#M1060283 rserao 2004-01-05T02:20:03Z