Access-list count not increasing

sajsoft — Fri, 21 Feb 2020 08:06:56 GMT

I have configured bandwidth reservation in my routers

My probelm is I am not getting any hits on the access-lists Eventhough data traffic is there as per the access-list and in the show policy-map interface output not seeing any packet count.

This is my config

version 12.2

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

hostname ******

logging queue-limit 100

logging buffered 51200 warnings

enable secret 5 *****!

ip subnet-zero

ip cef

no voice hpi capture buffer

no voice hpi capture destination

mta receive maximum-recipients 0

crypto isakmp policy 10

authentication pre-share

group 2

crypto isakmp key ****** address **.**.**.**!

crypto ipsec transform-set test esp-des

crypto map test 5 ipsec-isakmp

set peer **.**.**.**

set transform-set test

match address IPSEC

qos pre-classify

class-map match-all testmap

match access-group 110

policy-map policytest

class testmap

bandwidth 128

police cir 131000

interface Tunnel0

ip unnumbered FastEthernet0/0

qos pre-classify

keepalive 10 3

tunnel source Serial1/0

tunnel destination **.**.**.**

crypto map test

interface FastEthernet0/0

ip address **.**.**.** 255.255.0.0

ip route-cache flow

speed auto

interface Serial1/0

bandwidth 2048

ip address **.**.**.** 255.255.255.25*

service-policy output policytest

encapsulation ppp

ip route-cache flow

clockrate 2000000

ppp bridge ip

crypto map test

ip route 10.0.0.0 255.255.0.0 Tunnel0

ip access-list extended IPSEC

permit ip 10.*.0.0 0.0.255.255 host 10.0.0.*

access-list 110 permit ip 10.*.0.0 0.0.255.255 host 10.0.0.*

mgcp profile default

dial-peer cor custom

Pls help

topic Access-list count not increasing in Network Security

Access-list count not increasing