topic C3640 and CBQ in Network Security https://community.cisco.com/t5/network-security/c3640-and-cbq/m-p/102216#M1063752 <P>My customer has a C3640 with IOS 12.1(5)T9, Is it possible to configure Class based Queuing on a IPSec tunnel(ESP mode) using this IOS, if this is not possible would it be possible to configure a Priority Queuing on a IPSec tunnel. Or do i need to upgrade the IOS to 12.2 which has the additional feature of Qos for VPN ? </P> Fri, 21 Feb 2020 06:22:58 GMT mbhat 2020-02-21T06:22:58Z C3640 and CBQ https://community.cisco.com/t5/network-security/c3640-and-cbq/m-p/102216#M1063752 <P>My customer has a C3640 with IOS 12.1(5)T9, Is it possible to configure Class based Queuing on a IPSec tunnel(ESP mode) using this IOS, if this is not possible would it be possible to configure a Priority Queuing on a IPSec tunnel. Or do i need to upgrade the IOS to 12.2 which has the additional feature of Qos for VPN ? </P> Fri, 21 Feb 2020 06:22:58 GMT https://community.cisco.com/t5/network-security/c3640-and-cbq/m-p/102216#M1063752 mbhat 2020-02-21T06:22:58Z Re: C3640 and CBQ https://community.cisco.com/t5/network-security/c3640-and-cbq/m-p/102217#M1063757 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P> For you to do any QoS with VPNs on Cisco Routers you would need to use the 12.2T train, the details of which are available at: <A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftqosvpn.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ftqosvpn.htm</A></P><P></P><P>Hope this helps,</P><P>Regards,</P><P>Aamir</P><P></P><P>-=-=-=-</P></BODY></HTML> Fri, 22 Nov 2002 08:29:24 GMT https://community.cisco.com/t5/network-security/c3640-and-cbq/m-p/102217#M1063757 awaheed 2002-11-22T08:29:24Z