Anyconnect client routing

pcromwell — Fri, 21 Feb 2020 15:06:02 GMT

We have several internal subnets such as 192.168.1.0 to 192 through to 192.168.30.0

anyconnect client needs to be able to access them all.

The ASA has 10 sub interfaces setup for the LAN side, such as 192.168.1.0 through to 192.168.10.0

All the subnets are allowed from VPN client.

However the client cannot connect to any subnet from .11 to .30

In the logs It says routing failed to find next hop from interface vlan.10 ( this is one of the sub interfaces on ASA.

I have tried adding a static route from interface vlan.10 to go to all the other routes but the log says the same thing.

does anyone have any ideas

Re: Anyconnect client routing

Ajay Saini — Tue, 09 Jan 2018 15:46:16 GMT

Hello,

Are these subnets .11 till .30 behind the .10 subinterface?

The resource that you are trying to reach from the anyconnect client, is it reachable from the ASA itself?

Can you please post the log message and the interface and route configuration from the ASA if that does not contain sensitive info.