ERROR: Object group INT_ not found

jasongr33nway — Fri, 21 Feb 2020 14:37:35 GMT

I am having this issue when I try to place an object-group on my OUTSIDE-IN ACL. I am not sure why I am receiving this error?

Here is the Object-Group

# sh run | begin INT_BLOCKED_IPs
object-group network INT_BLOCKED_IPs
description Blocked_International_IPs
network-object 62.210.0.0 255.255.0.0
network-object 37.187.0.0 255.255.0.0
network-object 46.29.160.0 255.255.248.0
network-object 195.154.0.0 255.255.0.0
network-object 93.115.24.0 255.255.248.0
network-object 54.36.0.0 255.254.0.0
network-object 134.119.128.0 255.255.128.0
network-object 185.107.80.0 255.255.252.0
network-object 46.17.40.0 255.255.248.0
network-object 62.141.32.0 255.255.240.0
network-object 62.4.0.0 255.255.224.0
network-object 213.163.97.0 255.255.255.0
network-object 219.148.0.0 255.255.0.0
network-object host 155.94.65.122
network-object host 165.227.116.27
network-object host 107.155.141.130

Here is the error I am receiving.

(config)# access-list OUTSIDE-IN extended deny object-group INT_BLOCKED_IPs
ERROR: Object group INT_ not found

Re: ERROR: Object group INT_ not found

mikael.lahtela — Thu, 02 Nov 2017 17:59:30 GMT

Hi,

Are you missing protocol in your ACE?
(config)# access-list OUTSIDE-IN extended deny object-group INT_BLOCKED_IPs

should be:
access-list OUTSIDE-IN extended deny ip object-group INT_BLOCKED_IPs

br, Micke

Re: ERROR: Object group INT_ not found

jasongr33nway — Thu, 02 Nov 2017 18:18:39 GMT

That's what it was!

Thanks for the help!

topic Re: ERROR: Object group INT_ not found in Network Security

ERROR: Object group INT_ not found

Re: ERROR: Object group INT_ not found

Re: ERROR: Object group INT_ not found