topic ASA-5506 with Multiple Public IP Addresses in Network Security

ASA-5506 with Multiple Public IP Addresses

sam.nikoukar — Fri, 21 Feb 2020 14:34:52 GMT

Hello All,

I am having some issues regarding ASA-5506 Firewall.

I currently have few routers and servers connecting to the outside with the following protocols on Cisco 2911's:

-OSPFv2 (Important)

- HTTP

-HTTPS

- FTP

-SFTP

- ETC

I have tried few different methods but i have many different errors. Finally I have restored the router to factory default.

My experience with CISCO Firewall is limited, but I need to get this going as fast as I can. I have configured the current network configuration using Cisco 2911's , but not the firewall. I greatly appreciate the help. thanks

Re: ASA-5506 with Multiple Public IP Addresses

Flavio Miranda — Wed, 25 Oct 2017 19:44:41 GMT

Hello @sam.nikoukar

what do you need exactly? Do you need allow this protocol through the ASA?

Can you explain better what you need?

Also, provide show running-config of ASA and if possible some explanation about the flow ( from / to ).

If you have a draw even better.

-If I helped you somehow, please, rate it as useful.-

Re: ASA-5506 with Multiple Public IP Addresses

sam.nikoukar — Tue, 31 Oct 2017 12:41:27 GMT

Hi,

I have sent you a network diagram yesterday. If you haven't seen it , I will place the file here.

Let me know if you can help me.

Thanks

Sam

Re: ASA-5506 with Multiple Public IP Addresses

sam.nikoukar — Thu, 02 Nov 2017 12:48:39 GMT

Hello,

Anyone can help me with my problem?