topic RV320 Port forwarding? in Network Security

RV320 Port forwarding?

monkthecat — Fri, 21 Feb 2020 14:23:15 GMT

Hey everyone,

I'm wondering if it's possible to do port forwarding for incoming traffic on a public IP address assigned to the WAN port on my RV320, but to have the traffic sent to a LAN IP, but on a DIFFERENT port.

Fore example, the RV320 has WAN IP 12.34.56.78. If someone outside our network sends a request to the ip 12.34.56.78 on port 8000, for example, I'd like to forward that port to and internal address, say 192.168.1.78, but on port 800 (instead of 8000).

I'd like to do this using the Web admin tool. Can anyone help?

Re: RV320 Port forwarding?

Flavio Miranda — Thu, 28 Sep 2017 03:49:42 GMT

Hi,

Here we go:

Setup > Forwarding.

Add

Take a look here:

https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=edd62db30afb43c8a1a2cca1c7959022_Port_Forwarding_and_Port_Triggering_on_RV320_Router.xml&pid=2&converted=0

Re: RV320 Port forwarding?

monkthecat — Thu, 28 Sep 2017 04:00:18 GMT

The “Forwarding” section you mentioned does not allow me to change the destination port (for example, I can’t forward port 80 wan traffic to port 8000 on a private up).

Re: RV320 Port forwarding?

Flavio Miranda — Thu, 28 Sep 2017 04:23:51 GMT

Take a look here. Pretty well explained.

https://crocimassimo.files.wordpress.com/2016/01/rv320_rv325-how-to-set-one-to-one-nat.pdf

Re: RV320 Port forwarding?

AlbertanDave — Thu, 09 May 2019 18:09:57 GMT

Nope this PDF doesn't show any port address translation just forwarding.