topic Does anyone have experience installing Cisco ASA 5500-X Series 6-Port 10/100/1000? in Network Security

Does anyone have experience installing Cisco ASA 5500-X Series 6-Port 10/100/1000?

aamsq11 — Fri, 21 Feb 2020 14:18:35 GMT

We are planning to install interface card on ASA 5515 and wondering if has anyone expeirence.

Cisco ASA 5500-X Series 6-Port 10/100/1000. I'll be following the guide provided by Cisco for the upgrade.

I need to know if there are things I should be looking out for -- before and after install.

if anyone needs more information, let me know.

Re: Does anyone have experience installing Cisco ASA 5500-X Series 6-Port 10/100/1000?

LJ Gabrillo — Fri, 15 Sep 2017 16:49:58 GMT

1. Make sure you turn off the device before installing

2. Optional but highly recommended, make sure your grounded
2. Install the module. Dont forget to screw it in to hold it in place. Give it a little wiggle just to make sure

3. and poof! you're done
4. Turn on the device. Do a "show inventory" to check if the module is found. Do a "show interface ip brief" to check if your interfaces did indeed increase in numbers