Forwarding all the ports

George-Sl — Fri, 22 May 2020 21:40:43 GMT

So this is not primary about ASA, but I have the same question on an ASA,

I have never worked with a Cisco RV325 in the past, there is this feature inside of the port forwarding menu that you can forward ports 1~65535....

If we do that, how can the overload nat work on the same IP since we deplete all the ports, so it can't use a random port as a source port reference on outgoing packets?

basically can we have overload nat, and at the same time forward all the ports from outside to inside with one IP?

Thanks

Re: Forwarding all the ports

balaji.bandi — Fri, 22 May 2020 21:53:13 GMT

yes outside NAT overload working in different way - compare to incoming.

you should be able to do below task : ( test and advise any issue?)

basically can we have overload nat, and at the same time forward all the ports from outside to inside with one IP?

topic Re: Forwarding all the ports in Network Security

Forwarding all the ports

Re: Forwarding all the ports