topic Security Concern on Cisco 827 in Network Security

Security Concern on Cisco 827

Rolitto — Tue, 23 Jun 2020 17:18:53 GMT

Hi everyone,

I am aware that the Cisco 827 is no longer supported but I am trying to figure out whether it is recommended or required to deploy a dedicated ASA Firewall for the sake of security and protection purposes of SOHO end devices behind the router.

I would like to hear your opinions on that matter, thanks in advance.

Re: Security Concern on Cisco 827

Rob Ingram — Tue, 23 Jun 2020 17:33:34 GMT

Hi,

Yes, I’d recommend a firewall behind the router. However I’d suggest a newer Firepower 1010 device running FTD, ASA hardware is EOL or will soon be. FTD software has the latest NGFW threat protection features and provides greater protection than the ASA.

HTH

Re: Security Concern on Cisco 827

Rolitto — Tue, 23 Jun 2020 22:39:11 GMT

Ok I noted that... but if I swap the Cisco 827 with the Cisco 867VAE-K9, which according to its quick guide, seems to come pre-loaded with some basic Firewall rules.

I'm asking this because I intend to use the least number of devices possible while maintaining some security for this SOHO network as it is simply needed for a couple of desktops without any database or server services running on them.

What do you think?

Re: Security Concern on Cisco 827

Marvin Rhoads — Wed, 24 Jun 2020 01:58:59 GMT

I second @Rob Ingram 's recommendation. The 1010 can act as a switch and even provide a couple of PoE interfaces as well as acting as a real firewall.

The firewall capabilities in the small routers are really not effective against modern threats.