topic Re: Enabling Netflow from ASDM in Network Security

Enabling Netflow from ASDM

D@1984 — Wed, 22 Jul 2020 11:35:47 GMT

When I try to enable netflow on global policy I get a message saying "only inspect rule actions can be specified for the default inspection traffic". I only need to enable it to monitor traffic from one IP network to a a specific destination address.

How can I create a new class with netflow configured on it?

Thanks

Re: Enabling Netflow from ASDM

Marius Gunnerud — Wed, 22 Jul 2020 11:59:57 GMT

refer to the following link for a guide on creating a new Netflow class.

https://www.cisco.com/c/en/us/td/docs/security/asa/special/netflow/guide/asa_netflow.html#pgfId-1340009

Re: Enabling Netflow from ASDM

balaji.bandi — Wed, 22 Jul 2020 12:02:07 GMT

here is the example guide to configure :

https://community.cisco.com/t5/security-documents/configuring-netflow-on-asa-with-asdm/ta-p/3119466

if this has not help you,. post the information and configuration have put in place to review.

Re: Enabling Netflow from ASDM

D@1984 — Wed, 22 Jul 2020 15:16:20 GMT

following those steps but when went on netflow I got an error.

Re: Enabling Netflow from ASDM

balaji.bandi — Wed, 22 Jul 2020 16:08:39 GMT

Can you post the error screenshot or config to understand.

Re: Enabling Netflow from ASDM

D@1984 — Wed, 22 Jul 2020 21:59:38 GMT

I'm trying to configure it from asdm and the error is as what I explained above.

Re: Enabling Netflow from ASDM

balaji.bandi — Wed, 22 Jul 2020 23:06:40 GMT

we need more information as I was requested

Do we need a model of the Device? what code running, what is the ASDM Version?

do you have SFR in that ASA?

maybe look at this bug :

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg15782/?rfs=iqvred