topic Re: FPR 1010 connected client not getting DNS in Network Security

FPR 1010 connected client not getting DNS

mickyq — Tue, 08 Sep 2020 14:35:44 GMT

out of the box setup using FDM and the client device or the management device dont get DNS.

manually enter a DNS IP in the client NIC properties and DNS lookups work. I can browse the internet. The same applies for the device on the management port.

how does the client get DNS settings. DHCP works ok but no DNS settings pulled through to client device.

thanks

Re: FPR 1010 connected client not getting DNS

mickyq — Tue, 08 Sep 2020 14:48:51 GMT

Found the problem.

Go into DHCP>Configuration and either add some DNS IP's or hit the use opendns button.

why is there a DNS server config if it does not get used?

Re: FPR 1010 connected client not getting DNS

Ruben Cocheno — Wed, 09 Sep 2020 00:14:26 GMT

@mickyq

By default could have the DNS servers setup, but unfortunately is not the case.