topic Re: FTD capacity reporting - automated monthly in Network Security

FTD capacity reporting - automated monthly

mateens — Tue, 20 Oct 2020 07:11:36 GMT

Hi,

Is it possible to send capacity reporting like cpu utilizaton and interface utilization monthly in an automated way to an email etc ?

Re: FTD capacity reporting - automated monthly

Mohammed al Baqari — Tue, 20 Oct 2020 07:50:39 GMT

Hi,

You need an NMS to do this or FMC. From FTD directly, it won't work.

Re: FTD capacity reporting - automated monthly

mateens — Tue, 20 Oct 2020 08:14:31 GMT

Yes, using FMC.

Re: FTD capacity reporting - automated monthly

Marius Gunnerud — Tue, 20 Oct 2020 08:14:53 GMT

If you have FMC then you can do it:

https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Configuring_External_Alerting.html#ID-2197-00000096

Re: FTD capacity reporting - automated monthly

balaji.bandi — Tue, 20 Oct 2020 09:02:10 GMT

FMC contain some reports : is that works ?

https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Working_with_Reports.html#ID-2250-0000001d

Re: FTD capacity reporting - automated monthly

mateens — Tue, 20 Oct 2020 12:11:46 GMT

yes, manual report generation works. I am looking for automated report with cpu capacity etc.... There are many graphs etc in the report but nothing which just tells cpu% in the past month.