topic Re: FIREPOWER 1010 ROUTING in Network Security

FIREPOWER 1010 ROUTING

RAZIZUDDIN — Mon, 01 Feb 2021 04:49:27 GMT

HI ALL,

I have bought the firepower 1010 to act as gateway for my thirdparty item going to be connect with our network

our network based are 10.13.x.x and the outside are 192.168.20.x and 192.168.4.x

can the firepower do it using FDM. can we have the example how to do it

Thanks and Best REgards

Razizuddin

Re: FIREPOWER 1010 ROUTING

Mohammed al Baqari — Mon, 01 Feb 2021 07:07:48 GMT

Yes, FDM can configure FTD to do this.

**** please remember to rate useful posts

Re: FIREPOWER 1010 ROUTING

Marvin Rhoads — Mon, 01 Feb 2021 07:20:17 GMT

There are numerous ways to accomplish this. The simplest would be static routes and not using NAT. But your requirements for network traffic flow, addressing and security etc. would dictate which approach is best for you.

Re: FIREPOWER 1010 ROUTING

RAZIZUDDIN — Mon, 01 Feb 2021 09:32:54 GMT

This is my setup, and my FDM is as the gateway. how can i do that. can you explain how i want to do it. can you provide me some sample

@Marvin Rhoads and @Mohammed al Baqari

Re: FIREPOWER 1010 ROUTING

RAZIZUDDIN — Mon, 01 Feb 2021 10:26:53 GMT

Now i can already ping to my end to end host but weird I can't ping from outside host can't ping the inside interface/gateway and vice versa

Re: FIREPOWER 1010 ROUTING

Marvin Rhoads — Mon, 01 Feb 2021 12:38:40 GMT

It is by design that you cannot ping the inside interface from outside or vice versa. That won't work for FTD or ASA firewall.