Adding EIGRP to FTD using FMC

jcstrait2003 — Tue, 02 Feb 2021 17:45:46 GMT

Good Day,

FMC and FTD are running 6.6.1

I am simply trying to add eigrp to one of my FPR-1010s.

I created the flex config text object:

170Networks and gave it a value of 192.168.170.0 255.255.255.0

I have also tried just entering the subnet without the mask as the value.

I created a copy of the eigrp configuration and modified it.

router eigrp $eigrpAS
#### Insert network object group in place of $eigrpnets
#foreach ( $net in $170Networks )
network $net
#end

#### Disables auto-summary for eigrp
#if ( $eigrpDisableAutoSummary == "true" )
no auto-summary
#end

But all it is deploying is the router eigrp 1 line to the FTD. See below.

###Flex-config Prepended CLI ###

###CLI generated from managed features ###
!INTERFACE_START
interface Ethernet1/1
no shutdown
exit
interface Ethernet1/2
no shutdown
exit
!INTERFACE_END

###Flex-config Appended CLI ###
router eigrp 1

Anyone know why this would not work correctly?

Thanks for your help.

Re: Adding EIGRP to FTD using FMC

balaji.bandi — Tue, 02 Feb 2021 17:53:18 GMT

check the flexconfig again, you can see bottom each line variable section is that correct.

here is the good video for reference :

https://www.youtube.com/watch?v=Sv2VXmIq1Y4

topic Adding EIGRP to FTD using FMC in Network Security

Adding EIGRP to FTD using FMC

Re: Adding EIGRP to FTD using FMC