Are there any plans to integrate the redundant interface feature in a future Firepower software version?

sebastien.delagorce — Fri, 19 Feb 2021 10:20:40 GMT

Hello,

I use two Firepower 2130 units in high-availability mode (FDM-managed) to interconnect two LANs.

Each LAN has a redundant connection to each Firepower appliance, which involves two different switches.

I know that redundant interfaces are currently only supported on ASA platform due to a FXOS limitation (according to CSCvg30354 ). Instead EtherChannel cannot be implemented in my case because the used switches do not support VSS or vPC features.

So my question is : it planned in the Firepower roadmap (either FTD or ASA software) to integrate this redundant interface feature in a future release, and if so when?

Thanks in advance.

Re: Are there any plans to integrate the redundant interface feature in a future Firepower software version?

Dinesh Moudgil — Fri, 19 Feb 2021 10:42:16 GMT

Hi sebastien,

At the moment, this is still an enhancement. You might want to engage your Cisco representative or Accounts team at Cisco to expedite the process to fix this.

Thank you,

Dinesh Moudgil

P.S. Please rate helpful posts.

topic Re: Are there any plans to integrate the redundant interface feature in a future Firepower software version? in Network Security

Are there any plans to integrate the redundant interface feature in a future Firepower software version?

Re: Are there any plans to integrate the redundant interface feature in a future Firepower software version?