topic BGP configuration on FPR 4110 using FDM in Network Security

BGP configuration on FPR 4110 using FDM

Serge D — Sun, 21 Mar 2021 21:24:22 GMT

Hi,

Is it possible to configure bgp on cisco fpr 4110 using fdm?

Re: BGP configuration on FPR 4110 using FDM

Rob Ingram — Sun, 21 Mar 2021 21:28:27 GMT

@Serge D

Yes BGP is supported on FDM.

Re: BGP configuration on FPR 4110 using FDM

Serge D — Sun, 21 Mar 2021 22:45:11 GMT

Thank you, @Rob Ingram.

But How do I access that part? I mean when I go in the Device part then in Routing, I only see Static Routing.

Re: BGP configuration on FPR 4110 using FDM

Rob Ingram — Sun, 21 Mar 2021 22:49:33 GMT

What version are you running? Certainly on version 6.7 it's under the routing section.

You'll probably have to configure it using flexconfig.

Re: BGP configuration on FPR 4110 using FDM

Serge D — Sun, 21 Mar 2021 23:04:53 GMT

FTD and FDM version is the same, right?

Re: BGP configuration on FPR 4110 using FDM

Rob Ingram — Sun, 21 Mar 2021 23:07:00 GMT

Yes. FDM just means you are using local management of the FTD software.

Re: BGP configuration on FPR 4110 using FDM

Serge D — Sun, 21 Mar 2021 23:09:57 GMT

Ok thank you, so I'm running version 6.3

Re: BGP configuration on FPR 4110 using FDM

Marvin Rhoads — Mon, 22 Mar 2021 16:11:26 GMT

In the current recommended release (6.6.1), note that BGP is configurable via the FDM GUI:

OSPF and BGP configuration moved to the Routing pages.

In previous releases, you configured OSPF and BGP in the Advanced Configuration pages using Smart CLI. Although you still configure these routing processes using Smart CLI, the objects are now available directly on the Routing pages. This makes it easier for you to configure processes per virtual router.

The OSPF and BGP Smart CLI objects are no longer available on the Advanced Configuration page. If you configured these objects before upgrading to 6.6, you can find them on the Routing page after upgrade.

Previous releases required either Flexconfig (pre-6.5) or smart CLI (release 6.5 only) to configure BGP on a locally-managed FTD device.

Re: BGP configuration on FPR 4110 using FDM

Serge D — Wed, 24 Mar 2021 00:12:10 GMT

Hi @Rob Ingram and @Marvin Rhoads, thanks for your support.