multilayer switch and firewall

TaniaKanth85411 — Fri, 14 May 2021 15:38:51 GMT

Hi.

I am struggling with cisco packet tracer, i am a beginner in this field. I just build 3 vlans for my internal network that i want to connect to my firewall. I cant seem to connect it to the firewall. I just cant figure out how i should let the firewall know that the inside vlan 1 is for the internal network.

and on the multilayer switch the vlan 1 that i configure the firewall inside on, wont go from down to up? please help.

my ip address for my multilayer switch going to the firewall is 10.0.0.1/28

and my ip from the firewall into the internal network is 10.0.0.2/28

i just pasted a file below that shows the

Re: multilayer switch and firewall

Marius Gunnerud — Sun, 16 May 2021 21:01:43 GMT

My first observation is that both the switch and ASA are configured with IP 10.0.0.2. Change the switch IP to 10.0.0.1

int vlan 1

ip address 10.0.0.1 255.255.255.0

topic multilayer switch and firewall in Network Security

multilayer switch and firewall

Re: multilayer switch and firewall