topic Error when configuring two EIGRP routing instanced with Firepower 4110 managed by FMC in Network Security

Error when configuring two EIGRP routing instanced with Firepower 4110 managed by FMC

ABaker94985 — Mon, 12 Jul 2021 17:59:04 GMT

We're needing a second EIGRP instance running on our FTD. One is configured via FlexConfig, but when I attempt to add a second instance with a different AS, the FPR generates the following error:

TALDCFTD01 >> error : Too many IP routing processes for this routing protocol
ERROR: Unable to create router process
Config Error -- router eigrp 4

I just tested this on an ASA that is available to us, and it generates a similar error through CLI. I presume this is a limitation. Is there a workaround? Thanks

Re: Error when configuring two EIGRP routing instanced with Firepower 4110 managed by FMC

balaji.bandi — Mon, 12 Jul 2021 18:37:53 GMT

As per i know it supports 2 OSPF process ( we running Live now) , But Eigrip only 1

https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdm-eigrp.html

Re: Error when configuring two EIGRP routing instanced with Firepower 4110 managed by FMC

ABaker94985 — Wed, 14 Jul 2021 16:03:33 GMT

Thanks, BB!