topic Firepower 2110 FDM (Unable to ACCESS GUI) in Network Security

Firepower 2110 FDM (Unable to ACCESS GUI)

usman.works1985 — Wed, 22 Sep 2021 15:13:34 GMT

Hello Everyone,

I am trying to deploy firepower 2110 version 6.3, when go through the initial steps i.e. changing management IP address and setting it to local management. Then I unable to GUI (HTTPS). But yes I can PING and SSH.

anybody faced the same issue?

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

Marvin Rhoads — Wed, 22 Sep 2021 16:30:31 GMT

Normally we would run a current version like 6.6.4 or later.

That said, it the initial setup is done and it is configured for local management ("show managers"), we would normally expect the web UI to be reachable. As long as there isn't an https-access-list set to prevent it. ("show https-access-list" to confirm).

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

usman.works1985 — Wed, 22 Sep 2021 17:23:16 GMT

Thanks Marvin,

I think what you are trying to saying is, since I have changed the MGMT interface IP address and this need to be added in the HTTPS access-list is that what your mean? I will check this out tomorrow. and will update accordingly.

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

Marvin Rhoads — Wed, 22 Sep 2021 18:34:33 GMT

There is no https-access-list by default. I just mentioned it as something to check that would explain what you are encountering.

The more common explanation is the one I mentioned first - that local management (FDM = the GUI) is not completely or correctly enabled.

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

usman.works1985 — Thu, 23 Sep 2021 06:09:31 GMT

Yes, the local management is configured properly..

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

SabeelShakeel00430 — Wed, 20 Dec 2023 14:18:49 GMT

Was a resolution found for this issue ? I have the same problem, but it is on a different model of Firepower.

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

Marvin Rhoads — Wed, 20 Dec 2023 15:29:53 GMT

@SabeelShakeel00430

Give us your basics - what model, what software version, has it ever worked, output of "show managers" from cli, etc.

Re: Firepower 2110 FDM (Unable to ACCESS GUI)

o pyrrhon — Thu, 26 Sep 2024 13:13:32 GMT

had the same problem with chrome browser, entering just the IP address, but was able to access adding "https:"