topic Re: FTD-Anyconnect Start Before Logon Client issue in Network Security

FTD-Anyconnect Start Before Logon Client issue

sami.poles — Tue, 28 Sep 2021 12:06:38 GMT

Hi dears,

I hope you are looking well...

I have a small issue with start before login which is when I finish the installation the start before login icon appears in corner when I shutdown the PC and when I sign out but not appears when I lock out the PC so is there any solution to overcome this matter?

please check attachment.and check the small arrow position.

Thanks in advance

Re: FTD-Anyconnect Start Before Logon Client issue

Marvin Rhoads — Tue, 28 Sep 2021 13:18:35 GMT

That's the expected behavior. When the PC is locked, the user is still logged in so Start BEFORE Login module with the associated icon on the login screen does not apply.

I see the same on my lab PC with SBL module installed and active.

Re: FTD-Anyconnect Start Before Logon Client issue

sami.poles — Tue, 28 Sep 2021 14:04:39 GMT

Hi @Marvin Rhoads

many thanks for your replay.

but suppose the user disconnect the any-connect session and then lockout the laptop he will then need to restart the laptop and then logon again, this what I need to find a solution to pass this issue.

B.R,

Re: FTD-Anyconnect Start Before Logon Client issue

Marvin Rhoads — Tue, 28 Sep 2021 15:41:56 GMT

You could combine SBL with Always-On.

Here's the guide for setting up the AnyConnect VPN Always-On feature:

https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/administration/guide/b-anyconnect-admin-guide-4-10/configure_vpn.html#topic_BD02A53E0A714E23A56850698C830A6C

Re: FTD-Anyconnect Start Before Logon Client issue

sami.poles — Tue, 28 Sep 2021 16:52:39 GMT

@Marvin Rhoads

!!!

I don't thing this will solve the issue.