PBR on FDM

sv7 — Thu, 02 Dec 2021 18:30:30 GMT

Hi All,

We have two Cisco FTD device ( manage by on-box means FDM) connected to 3 ISP setup on WAN side namely TCL, Airtel & Jio .TCL link is used for Site to Site VPN and Internet access.

Currently all traffic is routed through TCL link.

I need to achieve below scenerio

Route VPN traffic through TCL link

Route Internet traffic through jio & Airtel link as a failover mechanism

Is it possible to achieve this with on-box management ? Also i have got one link which says pbr is possible in version 6.6.5

https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660/fptd-fdm-routing.html

Please help me

Re: PBR on FDM

balaji.bandi — Thu, 02 Dec 2021 18:39:05 GMT

Short answer NO i guess as per below thread help you :

https://community.cisco.com/t5/network-security/having-problem-on-creating-pbr-in-cisco-ftd-2110-using-fdm/td-p/4311060

Note : i use most of the time FMC, not much hands on FDM.(and it has limited features)

topic PBR on FDM in Network Security

PBR on FDM

Re: PBR on FDM