https://community.cisco.com/t5/network-security/firepower-deployment-fail/m-p/4523896#M1086047 <P>When TAC intervention is required to manipulate the underlying database this should not generally be attempted on your own since doing it incorrectly can result in an unusable system.</P> <P>If you have entitlement to upgrade; then you should also have entitlement to open a TAC case. So follow that path for resolution.</P> Mon, 27 Dec 2021 01:33:32 GMT Marvin Rhoads 2021-12-27T01:33:32Z https://community.cisco.com/t5/network-security/firepower-deployment-fail/m-p/4523858#M1086045 <P>hello dears,</P><P>i face isssue when deploy configuration on fdm which manage firepower, this line "&nbsp;snort generation to sqlite failed" shown after deployment fail ,so i need your help asap&nbsp;</P><P>note: I see previous solution "<SPAN>UPDATE - SOLVED: With TAC Team we found out that there was an internal remote access user migrated from an older version which was not migrated correctly. after recreating (in this case just deleting) the user, the issue was gone. Thanks to TAC team for their help!" and i don't know how do this&nbsp;</SPAN></P> Sun, 26 Dec 2021 15:50:12 GMT https://community.cisco.com/t5/network-security/firepower-deployment-fail/m-p/4523858#M1086045 BMB_EG 2021-12-26T15:50:12Z https://community.cisco.com/t5/network-security/firepower-deployment-fail/m-p/4523896#M1086047 <P>When TAC intervention is required to manipulate the underlying database this should not generally be attempted on your own since doing it incorrectly can result in an unusable system.</P> <P>If you have entitlement to upgrade; then you should also have entitlement to open a TAC case. So follow that path for resolution.</P> Mon, 27 Dec 2021 01:33:32 GMT https://community.cisco.com/t5/network-security/firepower-deployment-fail/m-p/4523896#M1086047 Marvin Rhoads 2021-12-27T01:33:32Z