topic Re: Algosec user authentication with cisco ISE in Network Security

Algosec user authentication with cisco ISE

Wajih1 — Mon, 07 Mar 2022 11:43:46 GMT

Hi Guys,

I'm now integrating Algosec Solution with Cisco ISE radius server for user authentication (web Access). I didn't find the dedicated VSA for that in cisco ISE. Any one has already configured the same thing ?

thanks for your help !

regards,

Re: Algosec user authentication with cisco ISE

Rob Ingram — Mon, 07 Mar 2022 11:47:38 GMT

@Wajih1 algosec supports RADIUS so it will work without vendor specific attributes

Just configure algosec to authenticate to ISE RADIUS server and setup in ISE as a network device with the shared secret.

https://www.algosec.com/docs/en/asms/a30.00/asms-help/content/afa-admin/configuring-user-authentication.htm

Re: Algosec user authentication with cisco ISE

Wajih1 — Mon, 07 Mar 2022 12:47:19 GMT

Thanks for pour Replay !

Yes, i Know that Algosec support radius authentication, but i'm asking about Cisco ise policies configuration for Algosec Access.

Re: Algosec user authentication with cisco ISE

anli — Fri, 28 Jun 2024 09:31:21 GMT

For anyone struggling with this. On ISE you just set a typical ACCESS PERMIT, no special Attributes needed. What I found in the Algosec documentation that they dont clearly specify, is that you need to add each user that you want to allow via Radius as a User on the Algosec UI and check the "RADIUS Login" checkbox and give them the proper access.