topic Re: Smart License Register >> Error Invalid Input Detected at .. in Network Security

Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Fri, 20 May 2022 19:24:14 GMT

Firei,

I am trying to activate /license the FP1200 series running ASA software as:

1. Go to software.cisco.com and log into your Smart Account.
2. Under the Padlock icon, click Smart Software Licensing.
3. Go to the Inventory Tab -> General Click the New Token… button Enter a brief description of the token
(optional) Finish the token generation.
4. Go to your device and use the following commands: “license smart enable” “license smart idtoken …..” <- paste the token string in place of the dots.
4 (updated) license smart register (instead of license smart enable, it give me license smart register)

Output /Result: ERROR: % Invalid input detected at '^' marker.

What might be wrong here, why token is not accepted?

iscoasa# license ?

smart Register/renew/deregister the product instance with the Cisco Licensing Authority

ciscoasa# license smart register ?

idtoken Specify the ID token for registration

ciscoasa# license smart register Token1234567Example...

ERROR: % Invalid input detected at '^' marker.

Re: Smart License Register >> Error Invalid Input Detected at ..

SinghRaminder — Fri, 20 May 2022 21:08:00 GMT

If you have access to ASDM,

In ASDM, choose Configuration > Device Management > Licensing > Smart Licensing.

Click Register

Paste ID-TOKEN

optionally - select force authentication

Re: Smart License Register >> Error Invalid Input Detected at ..

Marius Gunnerud — Sat, 21 May 2022 20:34:32 GMT

I am assuming that smart licensing has been enabled on the FTD / ASA device?

It is difficult to tell where the ^ is pointing to to identify which part of the command is providing the error. Could you indicate where it is pointing?

Also, provide the output of "show license all".

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Sun, 22 May 2022 08:56:24 GMT

^ is pointing to the very first letter of the Token.

Re: Smart License Register >> Error Invalid Input Detected at ..

Deepak Kumar — Sun, 22 May 2022 11:07:49 GMT

Copy topken and past in your notepad. Verify for any space or new line in the token itself and remove it.

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Sun, 22 May 2022 15:18:08 GMT

It's already in Notepad.

Re: Smart License Register >> Error Invalid Input Detected at ..

Marius Gunnerud — Sun, 22 May 2022 15:52:08 GMT

Please issue the command show license all and post the result.

Re: Smart License Register >> Error Invalid Input Detected at ..

andrewswanson — Sun, 22 May 2022 19:36:41 GMT

I believe the correct command for this is:

license smart register idtoken <YOUR_idtoken>

license smart register <YOUR_idtoken> would result in ERROR: % Invalid input

hth
Andy

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Sun, 22 May 2022 20:45:17 GMT

Thanks @andrewswanson

Let me try and get back with the result of the following:

license smart register idtoken <YOUR_idtoken>

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Mon, 23 May 2022 08:30:44 GMT

@andrewswanson you were correct, I was missing the "idtoken".

But the status is still showing "Registration in Progress".

Tried with ASDM, and same, Registration Status = Registering - Registration in Progress.

@Marius Gunnerud Following is the output of Show License All.

ciscoasa# show license all

Smart Licensing Status
======================

Smart Licensing is ENABLED

Registration:
  Status: REGISTERING - REGISTRATION IN PROGRESS
  Export-Controlled Functionality: NOT ALLOWED
  Initial Registration: FAILED on May 23 2022 08:21:52 
    Failure reason: Communication message send error
  Next Registration Attempt: May 23 2022 08:41:04 

License Authorization:
  Status: No Licenses in Use

Export Authorization Key:
  Features Authorized:
    <none>

Utility:
  Status: DISABLED

Data Privacy:
  Sending Hostname: yes
    Callhome hostname privacy: DISABLED
    Smart Licensing hostname privacy: DISABLED
  Version privacy: DISABLED

Transport:
  Type: Callhome

License Usage
==============

No licenses in use

Product Information
===================
UDI: PID:FirePower,SN:SerialNumber

Agent Version
=============
Smart Agent for Licensing: 4.9.3_rel/34

Reservation Info
================
License reservation: DISABLED

Re: Smart License Register >> Error Invalid Input Detected at ..

andrewswanson — Mon, 23 May 2022 08:53:58 GMT

Can you resolve tools.cisco.com from your device? If so, check that you can connect to it with "telnet tools.cisco.com 443".

hth

Andy

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Mon, 23 May 2022 10:10:36 GMT

@andrewswanson you mean like this?

Re: Smart License Register >> Error Invalid Input Detected at ..

andrewswanson — Mon, 23 May 2022 10:30:37 GMT

My apologies, I forgot you were using an ASA - you can't telnet/ssh from it. Try doing a ping to tools.cisco.com to see if this can be resolved - command will be something like "ping outside tools.cisco.com"

Andy

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Tue, 24 May 2022 08:01:56 GMT

Thanks @andrewswanson I guess something is still not in order.

Re: Smart License Register >> Error Invalid Input Detected at ..

Marius Gunnerud — Wed, 25 May 2022 22:19:47 GMT

Check to make sure that DNS lookups are configured on the ASA

show run dns

show run | in name-server

If it is not configured add the following (interface name is the name of the interface the DNS server is reachable through). You can add up to 6 DNS servers separated by a comma.

dns domain-lookup <interface name>

dns server-group DefaultDNS

name-server <DNS server IP address>

Re: Smart License Register >> Error Invalid Input Detected at ..

amh4y0001 — Mon, 30 May 2022 09:58:54 GMT

Thanks @Marius Gunnerud.

It's solved now. The ASA wasn't able to reach to the Internet and causing the licensing issues.

Appreciated your input here.