https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634541#M1091047 <P>No, if you are running ASA software with the SFR module then you should be choosing Firepower NAT.</P> Sun, 19 Jun 2022 21:41:52 GMT Marius Gunnerud 2022-06-19T21:41:52Z https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634537#M1091043 <P>Hello, I am new to the FMC firepower management center. I just have a question about the nat policies. I use an ASA 5525-X managed by my FMC. When creating the nat policy, I must choose Firepower nat or FTD nat and what is the difference between the two types of nat.</P> Sun, 19 Jun 2022 21:25:00 GMT https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634537#M1091043 seckka21 2022-06-19T21:25:00Z https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634538#M1091044 <P>You need to choose FTD NAT.&nbsp; Firepower NAT is for ASA firepower module and not an ASA that is running a full version of FTD.</P> Sun, 19 Jun 2022 21:29:25 GMT https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634538#M1091044 Marius Gunnerud 2022-06-19T21:29:25Z https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634539#M1091045 <P>My ASA is 5525-X with sfr module so i have to choose FTD nat.</P> Sun, 19 Jun 2022 21:34:00 GMT https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634539#M1091045 seckka21 2022-06-19T21:34:00Z https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634541#M1091047 <P>No, if you are running ASA software with the SFR module then you should be choosing Firepower NAT.</P> Sun, 19 Jun 2022 21:41:52 GMT https://community.cisco.com/t5/network-security/nat-fmc/m-p/4634541#M1091047 Marius Gunnerud 2022-06-19T21:41:52Z