topic Re: asa in eveng is not showing any interfaces in Network Security

asa in eveng is not showing any interfaces

Neaz_Arefin — Thu, 14 Apr 2022 03:18:33 GMT

hi, when ever I'm using cisco asa in eveng NOT the ASAV, most of the time the asa it is not showing any interfaces but once in a while is shows interfaces, anybody has any idea of remedy it ? Thank you.

Re: asa in eveng is not showing any interfaces

balaji.bandi — Thu, 14 Apr 2022 14:10:00 GMT

what version of ASA - never seen this issue on my labs

follow below guide :

https://www.youtube.com/watch?v=atFzZrf9xfk

Re: asa in eveng is not showing any interfaces

Neaz_Arefin — Sat, 16 Apr 2022 22:14:33 GMT

Sometime it shows interfaces, most of the time it doesn't. I know it's strange !! in a lab if I'm using multiple ASAs of the same model, os, hardware version one is showing all the interfaces Vs other doesn't. so the whole time and effort for he lab goes in vain.
Problem :-
asa-1(config)# sh int ip br
Interface IP-Address OK? Method Status Protocol
IT IS NOT SHOWING ANY INTERFACES HERE


asa-1(config)# sh run
ASA Version 9.1(5)16
: Serial Number: JMX1203L0NN
: Hardware: ASA5520, 3072 MB RAM, CPU Pentium II 1000 MHz

asa-1(config)# sh ver

Cisco Adaptive Security Appliance Software Version 9.1(5)16
Device Manager Version 7.3(3)

any solution ? I need to use the ASA in EVE-NG for few labs not the asaV though. Tried couple of other versions of the asa,
however haven't got any solution yet.

Re: asa in eveng is not showing any interfaces

balaji.bandi — Sat, 16 Apr 2022 22:12:14 GMT

I used the same version and it works as expected.

here is my template config :

Re: asa in eveng is not showing any interfaces

zouextzouaext37622 — Thu, 28 Jul 2022 08:03:13 GMT

Hello,

You have to change the interface mode

Re: asa in eveng is not showing any interfaces

Villager — Tue, 27 Jun 2023 15:18:16 GMT

Just create and new lab and I'm working on that.

Re: asa in eveng is not showing any interfaces

mrCua — Tue, 24 Sep 2024 15:04:01 GMT

i have same config but asa topo show g0/0, but in asa command e0, and i connect but can not ping. hic hic, pls help

Re: asa in eveng is not showing any interfaces

MHM Cisco World — Tue, 24 Sep 2024 15:07:53 GMT

I prefer make new post

MHM

Re: asa in eveng is not showing any interfaces

mrCua — Fri, 27 Sep 2024 12:36:39 GMT

ciscoasa> ena
Password:
ciscoasa# sh int ip bri
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 unassigned YES unset administratively down down
Ethernet0/1 unassigned YES unset administratively down down
Ethernet0/2 unassigned YES unset administratively down down
Ethernet0/3 unassigned YES unset administratively down down
Ethernet0/4 unassigned YES unset administratively down down
Ethernet0/5 unassigned YES unset administratively down down
Ethernet0/6 unassigned YES unset administratively down down
Management0/0 unassigned YES unset administratively down down

Re: asa in eveng is not showing any interfaces

mrCua — Fri, 27 Sep 2024 12:39:37 GMT

can you help me share image, i need lab multi context, tks you

Re: asa in eveng is not showing any interfaces

balaji.bandi — Fri, 27 Sep 2024 18:02:36 GMT

i am sure google.com have enough links to download, if you closely look the version i have used in show version command.

You can download from cisco if you have access to image, unfortunately i do not share the images.