https://community.cisco.com/t5/network-security/enabling-dhcp-relay-information/m-p/4798684#M1098850 <P>How do we enable “dhcprelay information trust-all” in a Firepower 1120 running version 7.2.0.1?</P> <P><BR />DHCP snooping is activated in LAN, and the firewall is acting as ip helper/dhcp relay. The firewall is dropping dhcp packets because we haven’t been able to enable “dhcprelay information trust-all”. In earlier versions of Firepower we could run the command as a FlexConfig command, but how do we achieve this in version 7.2?</P> <P><BR />We have tried with the API “command” but is says command is not supported. </P> Tue, 21 Mar 2023 16:19:32 GMT RahmaSallm 2023-03-21T16:19:32Z https://community.cisco.com/t5/network-security/enabling-dhcp-relay-information/m-p/4798684#M1098850 <P>How do we enable “dhcprelay information trust-all” in a Firepower 1120 running version 7.2.0.1?</P> <P><BR />DHCP snooping is activated in LAN, and the firewall is acting as ip helper/dhcp relay. The firewall is dropping dhcp packets because we haven’t been able to enable “dhcprelay information trust-all”. In earlier versions of Firepower we could run the command as a FlexConfig command, but how do we achieve this in version 7.2?</P> <P><BR />We have tried with the API “command” but is says command is not supported. </P> Tue, 21 Mar 2023 16:19:32 GMT https://community.cisco.com/t5/network-security/enabling-dhcp-relay-information/m-p/4798684#M1098850 RahmaSallm 2023-03-21T16:19:32Z https://community.cisco.com/t5/network-security/enabling-dhcp-relay-information/m-p/4798696#M1098851 <P>I will check the point of FTD support dhcp trust all, but why you not disable the op82 in LAN SW ??</P> Tue, 21 Mar 2023 16:29:16 GMT https://community.cisco.com/t5/network-security/enabling-dhcp-relay-information/m-p/4798696#M1098851 MHM Cisco World 2023-03-21T16:29:16Z