topic Re: ISE-application no running in Network Security

ISE-application no running

Ramprasad2 — Fri, 31 Mar 2023 08:55:11 GMT

i have ISE 2.7.X , but application not run

i have run the cmd: application start ise and after application start ise safe

even i have done with config-rest and again try but not run after i have done re-image but not successful.

i have used eve-n palate form

Re: ISE-application no running

balaji.bandi — Fri, 31 Mar 2023 09:01:35 GMT

ISE running as VM or Appliance? do you have enough resources(like disk space ?)

If this is the initial setup, does ISE take some time to get all running as expected?

Also, check the Logs what error you getting from the shell.

i have used eve-n palate form <-- you mean you using eve-ng?

Re: ISE-application no running

Ramprasad2 — Fri, 31 Mar 2023 09:27:27 GMT

yes i used eve-ng

i have allocated 800 GM HDD and RAM 32GM and 12cpu

this logs found

Re: ISE-application no running

balaji.bandi — Fri, 31 Mar 2023 09:44:50 GMT

i have allocated 800 GM HDD and RAM 32GM and 12cpu <<- is this for ISE itself or total eve ?

We recommend that your VM host server use hard disks with a minimum speed of 10,000 RPM.

Note

When you create the Virtual Machine for Cisco ISE, use a single virtual disk that meets the storage requirement. If you use more than one virtual disk to meet the disk space requirement, the installer may not recognize all the disk space.

https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_01.html.xml

Re: ISE-application no running

Ramprasad2 — Fri, 31 Mar 2023 09:46:27 GMT

i have allocated 800 GM HDD and RAM 32GM and 12cpu- total eve

Re: ISE-application no running

Marvin Rhoads — Fri, 31 Mar 2023 12:46:39 GMT

EVE-NG is not a supported virtualization environment for Cisco ISE.

Re: ISE-application no running

Ramprasad2 — Fri, 31 Mar 2023 14:53:17 GMT

Hi Marvin,

i hope this is jok.
eve-ng support cisco ise

Re: ISE-application no running

Ramprasad2 — Fri, 31 Mar 2023 14:57:25 GMT

hi Marvin,

read below doc

https://www.eve-ng.net/index.php/documentation/howtos/howto-add-cisco-ise/

installation link https://www.youtube.com/watch?v=SqRvamyU-kk

Re: ISE-application no running

balaji.bandi — Sat, 01 Apr 2023 09:10:15 GMT

have you looked at ISE requirement to run Qcow2 file ?

https://www.eve-ng.net/index.php/documentation/howtos/howto-add-cisco-ise/

Note: this is not a cisco issue, this is more of a Simulator issue about how that work, so better you need to ask a respected forum to get a proper reply.

Note : i did run ISE on PNET it works as expected before 2.4 and 2.7 (now i have moved to ISE 3.0 VM on esxi, that give more flexible than inside pnet/eve.

Suggestion: turn off all the nodes, and check the df -h space check.

run the ISE again with problem image download from right place :

https://www.eve-ng.net/index.php/documentation/howtos/howto-add-cisco-ise/