topic Re: LILO Keytable read/checksum error in Network Security

LILO Keytable read/checksum error

David Ettinger — Sat, 20 May 2023 23:54:40 GMT

I am attempting to install a FMC virtual appliance (Cisco_Firepower_Mgmt_Center_Virtual_KVM-7.0.5-72.qcow2) on my Redhat 8 computer. When I run my installation script to configure the VM and boot I get a "LILO Keytable read/checksum error" immediately. I have used this qcow2 image and the installation script on two other computers without a problem. I've attached my installation script (I changed the extension to .txt for upload).

Re: LILO Keytable read/checksum error

Flavio Miranda — Sun, 21 May 2023 00:35:47 GMT

You may take a look on this link. This is for Slack but you may try in RedHat and see what happens.

https://www.linuxquestions.org/questions/slackware-14/lilo-keytable-read-checksum-error-4175520197/

Re: LILO Keytable read/checksum error

David Ettinger — Sun, 21 May 2023 01:52:19 GMT

Thanks Fliavio. I saw this solution. I've been around Linux a long time but have never really had to deal with lilo so I don't really know what this means. I just don't understand how I could install off the shelf Cisco VM on two different laptops (one didn't even support virtualization but the FMC VM still booted) but it won't run on two different server machines that are already running KVMs. Are their BIOS setting that might have something to do with this? I'm dead in the water until I can solve this.