topic Configure IP SLA monitors in FTD through FMC in Network Security

Configure IP SLA monitors in FTD through FMC

LuigiDiFronzo9542 — Thu, 25 May 2023 14:35:49 GMT

Hello,

Id´like to configure IP SLA monitors on FTD through FMC both ver 7.0.1. So when the main path is out, the backup one becomes the principal.

Thanks.

Re: Configure IP SLA monitors in FTD through FMC

Rob Ingram — Thu, 25 May 2023 14:37:20 GMT

@LuigiDiFronzo9542 that's straight forward, here is a guide.

Re: Configure IP SLA monitors in FTD through FMC

LuigiDiFronzo9542 — Thu, 25 May 2023 14:45:35 GMT

Thank you for the information, I had seen the guide but I have a question, since I saw some images from a previous versión and I'd like to know if the same applies to ver 7.0.1.

thanks again.

Re: Configure IP SLA monitors in FTD through FMC

Rob Ingram — Thu, 25 May 2023 14:54:27 GMT

Of course, that functionality is not going to be removed. Here are the offical guides for default routes and SLA monitor objects.

https://www.cisco.com/c/en/us/td/docs/security/firepower/70/configuration/guide/fpmc-config-guide-v70/static_and_default_routes_for_firepower_threat_defense.html?bookSearch=true

https://www.cisco.com/c/en/us/td/docs/security/firepower/70/configuration/guide/fpmc-config-guide-v70/reusable_objects.html#task_F02660A479A14815A29083B8862266B1

Re: Configure IP SLA monitors in FTD through FMC

LuigiDiFronzo9542 — Thu, 25 May 2023 14:56:47 GMT

Great, Thans a lot.