topic FPR1010 power off in Network Security

FPR1010 power off

navneet-k1 — Tue, 30 May 2023 10:56:55 GMT

How to poweroff FPR1010 gracefully?

Re: FPR1010 power off

MHM Cisco World — Tue, 30 May 2023 11:04:42 GMT

you use FDM or FMC ?

Re: FPR1010 power off

Rob Ingram — Tue, 30 May 2023 11:09:33 GMT

@navneet-k1 from the CLI, either SSH or via the console cable, run the command "shutdown".

If using the console cable, after 10 seconds or so the FTD will tell you the "System is stopped" and "It is safe to power off now". You can then pull the power cable.

Re: FPR1010 power off

navneet-k1 — Tue, 30 May 2023 11:30:54 GMT

Could you please also let me know if I can copy the configuration from asa5506 to FPR1010. I mean can I create a backup from asa5506 & restore FPR1010 with that backup.

Re: FPR1010 power off

navneet-k1 — Tue, 30 May 2023 11:31:42 GMT

FDM.

Could you please also let me know if I can copy the configuration from asa5506 to FPR1010. I mean can I create a backup from asa5506 & restore FPR1010 with that backup.

Re: FPR1010 power off

Rob Ingram — Tue, 30 May 2023 11:36:01 GMT

@navneet-k1 If you are running FDM, then no you cannot backup configuration from ASA and restore to FPR1010.

As you are running FDM you either need to manually configure the device using FDM GUI or use CDO as a migration tool.

https://www.cisco.com/c/en/us/td/docs/security/firepower/migration-tool/migration-guide-CDO/ASA2FTD_Using_CDO/m_how_to_implement_migration.html

The Firepower Migration Tool will only migration ASA configuration if using FMC, not FDM.

Re: FPR1010 power off

MHM Cisco World — Tue, 30 May 2023 11:42:32 GMT

As @Rob Ingram suggest
you need to use FMC to migrate the config from ASA to FPR, and here also you must was use FMC to control ASA.
here you have FDM so you need to manually migration the config.

Re: FPR1010 power off

navneet-k1 — Tue, 30 May 2023 12:21:00 GMT

Hi Rob, I am a beginer. Could you please provide a nice document on this?