https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4912971#M1103846 <P>Hi!</P><P>Tried to upgrade to 7.2.4 and later but all VLANs stopped working regardless of version above below, had to revert but that failed so had to reimage to the version I started on (7.1.0-90). When restoring the config through GUI snort3 fails on deployment and breaks the whole FTD. Getting unexpected error occurred on all actions...</P><P>So now I have manually reconfigured it but wondering if its possible to just copy paste it in the CLI? Reason im asking is i saw a post earlier that its not possible anymore on FTD to configure through CLI, its only done through the GUI. Is that correct?</P><P>thanks!</P> Mon, 28 Aug 2023 11:57:46 GMT S3C 2023-08-28T11:57:46Z https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4912971#M1103846 <P>Hi!</P><P>Tried to upgrade to 7.2.4 and later but all VLANs stopped working regardless of version above below, had to revert but that failed so had to reimage to the version I started on (7.1.0-90). When restoring the config through GUI snort3 fails on deployment and breaks the whole FTD. Getting unexpected error occurred on all actions...</P><P>So now I have manually reconfigured it but wondering if its possible to just copy paste it in the CLI? Reason im asking is i saw a post earlier that its not possible anymore on FTD to configure through CLI, its only done through the GUI. Is that correct?</P><P>thanks!</P> Mon, 28 Aug 2023 11:57:46 GMT https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4912971#M1103846 S3C 2023-08-28T11:57:46Z https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4913012#M1103848 <P><a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1089849">@S3C</a>&nbsp;no, unfortunately you cannot copy and paste the configuration using the CLI. The CLI on the FTD is for device mgmt, diagnostics and troubleshooting. You have to use the GUI for deploying the Access Control Policies, data interfaces, routing etc.</P> <P>&nbsp;</P> Mon, 28 Aug 2023 12:39:49 GMT https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4913012#M1103848 Rob Ingram 2023-08-28T12:39:49Z https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4914187#M1103890 <P>Thanks for confirming Rob.</P> Tue, 29 Aug 2023 20:12:09 GMT https://community.cisco.com/t5/network-security/firepower-1120-cli-configuration/m-p/4914187#M1103890 S3C 2023-08-29T20:12:09Z