https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927190#M1104458 <P>Check this link&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html</A></P> Thu, 21 Sep 2023 13:05:19 GMT MHM Cisco World 2023-09-21T13:05:19Z https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927144#M1104455 <P>Hi Team,</P><P>We have FTDs monitoring with its Management Interface. But the monitoring tool doesn't fetch the details of FTD interfaces or any details of resources such as CPU, Memory etc. Not sure what needs to be done to get this info. We have only 4 OIDs for this FTD. So anything to be done to get this checked?</P><P>Regards,</P><P>Sanjay S</P> Thu, 21 Sep 2023 12:26:01 GMT https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927144#M1104455 ssan239 2023-09-21T12:26:01Z https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927188#M1104457 <P>&nbsp;</P> <P>&nbsp;- Verify if the correct OID's are being used by querying the FTD with <STRONG>snmpget</STRONG> (or snmpwalk)</P> <P>&nbsp;M.</P> Thu, 21 Sep 2023 13:02:41 GMT https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927188#M1104457 Mark Elsen 2023-09-21T13:02:41Z https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927190#M1104458 <P>Check this link&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html</A></P> Thu, 21 Sep 2023 13:05:19 GMT https://community.cisco.com/t5/network-security/snmp-for-ftd/m-p/4927190#M1104458 MHM Cisco World 2023-09-21T13:05:19Z