topic Re: FTD Time Doesn't Update in Network Security

FTD Time Doesn't Update

Balxion — Fri, 13 Oct 2023 16:54:31 GMT

I'm setting up my Firepower 1120 and its running FTD 7.2.5. When I go to put in the NTP server I used google as a test the time wouldn't update I can ping time.google.com and when i show ntp I think it just gives me the local when I thought I had set up the servers. I'm stuck thanks for the help

Re: FTD Time Doesn't Update

MHM Cisco World — Fri, 13 Oct 2023 17:04:25 GMT

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/215468-configure-verify-and-troubleshoot-netwo.html

The fpr 1000 is get sync with ntp via fmc.

Do you use fmc ?

Re: FTD Time Doesn't Update

balaji.bandi — Fri, 13 Oct 2023 17:06:25 GMT

Try adding IP address of time.google.com and test it

Re: FTD Time Doesn't Update

Balxion — Fri, 13 Oct 2023 17:24:53 GMT

No I'm using FDM

Re: FTD Time Doesn't Update

Balxion — Fri, 13 Oct 2023 17:42:30 GMT

Thank you the ips worked

Re: FTD Time Doesn't Update

Marvin Rhoads — Fri, 13 Oct 2023 17:43:00 GMT

Does your management interface have DNS working and is it able to reach the specified servers?

Test with "ping system time.google.com" from the cli.

Re: FTD Time Doesn't Update

Balxion — Fri, 13 Oct 2023 17:45:15 GMT

yes i was able to ping from the cli

Re: FTD Time Doesn't Update

balaji.bandi — Fri, 13 Oct 2023 17:53:10 GMT

check DNS configuration - make sure uses the right interface :

https://www.cisco.com/c/en/us/td/docs/security/firepower/630/fdm/fptd-fdm-config-guide-630/fptd-fdm-system.html#id_73499