topic Re: FTD NETFLOW CONFIGURATION in Network Security

FTD NETFLOW CONFIGURATION

fpenigaud@exaprobe.com — Mon, 30 Nov 2020 12:12:04 GMT

Hello,

Is it possible to configure multiple Netflow destination in FTD managed by an FMC (version 6.2 to 6.4.0.7) ?

Thank you for your feedback

Best Regards

Re: FTD NETFLOW CONFIGURATION

Rob Ingram — Mon, 30 Nov 2020 12:24:43 GMT

Hi fpenigaud@exaprobe.com

Here is the configuration guide, you'd need to use FlexConfig.

https://community.cisco.com/t5/security-documents/configuring-nsel-netflow-on-cisco-firepower-threat-defense-ftd/ta-p/3646300

Re: FTD NETFLOW CONFIGURATION

fpenigaud@exaprobe.com — Mon, 30 Nov 2020 15:23:49 GMT

Hello,

Thank you for your response, but that is not precisely what is requested.
I already have an operational Netflow configuration on FTD.
In the documentation that you provide there is no reference to configuring multiple Netflow destinations on FTD.
The configurations proposed in this document only concern a single Netflow destination for FTD.

If you have the information about the possibility of configuring multiple Netflow destinations for an FTD that would be appreciated.

Best regards

Re: FTD NETFLOW CONFIGURATION

benolyndav — Mon, 16 Oct 2023 19:36:55 GMT

I know its a bit old but did you get your answer as I have a requirment for the same.??

Thanks

Re: FTD NETFLOW CONFIGURATION

Rob Ingram — Mon, 16 Oct 2023 19:44:22 GMT

@benolyndav from 7.4 netflow is configurable natively in the FMC under Platform Settings. You can configure a maximum of 5 netflow collectors (if that is your requirement?). Prior to 7.4 version you needed to use FlexConfig to configure netflow settings (using ASA syntax).

https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/device-config/740/management-center-device-config-74/interfaces-settings-platform.html

Re: FTD NETFLOW CONFIGURATION

benolyndav — Tue, 17 Oct 2023 06:50:28 GMT

Can I edit whats already in place and add the second Netflow destination in .?? running version (7.0.x )

Thanks

Re: FTD NETFLOW CONFIGURATION

ogonzalezcomsoltx — Thu, 01 Feb 2024 19:25:42 GMT

This would definitely be nice. Currently trying to add a secondary Collector to receive NetFlow on FMC running 7.2.4.1. Looking like a whole new FlexConfig from scratch