topic ASA Syslog from Outside interface in Network Security

ASA Syslog from Outside interface

claudemichel — Mon, 15 Jan 2024 12:44:27 GMT

I'm currently trying to configure syslog on an ASA to send logs to a server via the outside interface. However, I'm facing an issue where nothing appears on the server. Are there any specific considerations or tips for setting up syslog on the outside interface of an ASA that I might be missing? Thanks

Re: ASA Syslog from Outside interface

balaji.bandi — Mon, 15 Jan 2024 13:59:45 GMT

Most of the ASA below logging config works - here is my Lab ASA config used outside :

logging enable
logging timestamp
logging trap informational
logging monitor debugging
logging buffered debugging
logging asdm informational
logging host outside SYSLOGSERVERIP

Also make sure you have ACL which allow from ASA to SYSLOG server UDP 514

below guide can help you :

https://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html

Re: ASA Syslog from Outside interface

MHM Cisco World — Mon, 15 Jan 2024 14:01:30 GMT

share the config you use
MHM