topic Re: SNMP sever on Firepower managed by FDM in Network Security

SNMP sever on Firepower managed by FDM

janvanek — Mon, 12 Feb 2024 11:50:13 GMT

Hello community!

I'm struggling with setting up a snmp server on a cisco FTD. I only have on-box management (FDM) running with the suggested version 7.2.5.

I'm pretty sure that in the past it was possible to upload the configuration via flexconfig, but now the flex config policy tells me that the command "snmp-server" is deprecated. I just need to monitor the device from external Zabbix server. Is there any workaround how to enable SNMP server here?

Thank you all

Jan

Re: SNMP sever on Firepower managed by FDM

Rob Ingram — Mon, 12 Feb 2024 12:09:37 GMT

@janvanek unfortunately, you still cannot configure SNMP natively in the FDM GUI, you configure SNMP on FDM using RestAPI.

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/216551-configure-and-troubleshoot-snmp-on-firep.html

Re: SNMP sever on Firepower managed by FDM

janvanek — Wed, 14 Feb 2024 08:27:20 GMT

Hi Rob, thx. for your reply. This is the solution. A little pity that Cisco removed the super easy snmp-server configuration, but what we can do...

Re: SNMP sever on Firepower managed by FDM

Sudqi — Thu, 03 Oct 2024 18:26:54 GMT

Hello everybody,

I see that the MGMT interface is not allowed to be as a source in the SNMP configuration, but does anyone know if the tunnel interface also the same?