topic Re: Error on initial deploy after adding Firepower Device to FMCv in Network Security

Error on initial deploy after adding Firepower Device to FMCv

ckilmer — Tue, 27 Feb 2024 23:30:34 GMT

Hi,

First time dealing with FMCv and Firepower. I'm used to working with ASA. I added my first device to my newly installed FMCv and the deployment of the Initial Policy fails with error "[error] : Config Error -- access-group CSM_FW_ACL_ global". The Initial Policy was configured as described in the manual.

Not sure what I've done wrong. Any help would be appreciated.

Re: Error on initial deploy after adding Firepower Device to FMCv

AHack210 — Wed, 28 Feb 2024 14:09:29 GMT

Hi ckilmer,
What version of FTDv? For your FMCv, what version and how much RAM have you allocated to the FMCv and FTDv?

Re: Error on initial deploy after adding Firepower Device to FMCv

byorath — Tue, 12 Mar 2024 21:38:02 GMT

Ahack210, we're running 7.4.1 on both and getting the same issue.

Re: Error on initial deploy after adding Firepower Device to FMCv

byorath — Tue, 12 Mar 2024 23:14:49 GMT

Hi,

Did you find a solution for this issue?

Thanks

Re: Error on initial deploy after adding Firepower Device to FMCv

AHack210 — Wed, 13 Mar 2024 19:56:57 GMT

Hi. How much RAM have you allocated to the FMC and FTD?

Re: Error on initial deploy after adding Firepower Device to FMCv

byorath — Wed, 13 Mar 2024 22:16:37 GMT

The Cisco recommended amount of 32GB - https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/fmcv/fpmc-virtual/fpmc-virtual-vmware.html

Re: Error on initial deploy after adding Firepower Device to FMCv

AHack210 — Sat, 16 Mar 2024 15:16:27 GMT

Is the FTD virtual or physical?