topic Re: Firepower 1010 vs 1010E in Network Security

Firepower 1010 vs 1010E

EvanC75 — Sat, 23 Mar 2024 16:32:59 GMT

The datasheet page below for the Cisco Firepower products indicates that there is a model 1010 and a 1010E. Does anyone know the difference? I have the 1010 model but was curious what the "E" version did differently. I was unable to find anything online.

https://www.cisco.com/c/en/us/products/collateral/security/firepower-1000-series/datasheet-c78-742469.html

Re: Firepower 1010 vs 1010E

Mark Elsen — Sat, 23 Mar 2024 16:37:35 GMT

- Ref : https://www.cisco.com/c/m/en_us/solutions/small-business/firewall-1010e.html
>....Introducing Cisco Firepower 1010 - Desktop model

Re: Firepower 1010 vs 1010E

EvanC75 — Sat, 23 Mar 2024 17:03:28 GMT

Thank you for the reply. I did see that page but it just shows the specs of 1010E, they don't look any different from the 1010.

Re: Firepower 1010 vs 1010E

TheGoob — Sun, 24 Mar 2024 02:31:20 GMT

What did you decide?

Re: Firepower 1010 vs 1010E

Blue_Bird — Sun, 24 Mar 2024 04:13:46 GMT

Hello EvanC75,

The Cisco Firepower 1010 and 1010E are a series of compact network security appliances in the Cisco Firepower family.
The Firepower 1010 is first supported in Firepower Threat Defense (FTD) Version 6.4 and ASA Version 9.12. PoE and L2 switch support were added beginning with FTD Version 6.5 and ASA Version 9.13.
The 1010E without PoE is supported first in Secure Firewall Threat Defense Version 7.2.3 and Secure Firewall ASA Version.

Best regards
******* If This Helps, Please Rate *******

Re: Firepower 1010 vs 1010E

EvanC75 — Sun, 24 Mar 2024 04:36:41 GMT

thanks!

Re: Firepower 1010 vs 1010E

Blue_Bird — Sun, 24 Mar 2024 08:01:55 GMT

Welcome..!!

Have a Nice day..!!

Thank You..

Re: Firepower 1010 vs 1010E

KarimSilva4416 — Thu, 30 May 2024 20:42:57 GMT

looking over the datasheet

Cisco Firepower 1000 Series Data Sheet - Cisco

I am thinking the E is for Eco, namely the power draw. Scroll down the sheet and you will see 115W vs 55W

Re: Firepower 1010 vs 1010E

EvanC75 — Fri, 31 May 2024 16:01:44 GMT

Thanks for the info. That makes sense with 1010 having two PoE+ ports that use the extra 60w. 1010 comes with a 150w power supply.

Re: Firepower 1010 vs 1010E

bhaskar.poojari — Fri, 18 Oct 2024 06:00:32 GMT

I have also seen that it doesn't support HA and clustering.

Can any one confirm that???

Re: Firepower 1010 vs 1010E

Blue_Bird — Fri, 18 Oct 2024 07:03:04 GMT

Hello bhaskar.poojari,

Yes...it supports HA and clustering..!

Also keep in mind...how you manage the device is also important....which means..

if you use Device manager to configure firepower then it supports only High availability. Device manager doesn't support Clustering feature. if you are managing the firepower through FMC, then you can implement both High availability and clustering.

Best regards
******* If This Helps, Please Rate *******

Re: Firepower 1010 vs 1010E

Rob Ingram — Fri, 18 Oct 2024 07:23:14 GMT

@bhaskar.poojari the FPR 1000 (or 2100) series hardware supports only HA (Active/Standby) NOT clustering.

Clustering is supported on 3100, 4100, 4200 or 9300 hardware.

https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/device-config/740/management-center-device-config-74/device-ops-cluster-sec-fw-3100.html

https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/device-config/740/management-center-device-config-74/device-ops-cluster-fxos.html

Re: Firepower 1010 vs 1010E

Blue_Bird — Fri, 18 Oct 2024 07:31:46 GMT

Yes...agreed..!

it supprts HA but not clustering..!

Best regards
******* If This Helps, Please Rate *******