topic Re: Help setting up FTDv in Azure in Network Security

Help setting up FTDv in Azure

n-russell-biggie — Thu, 08 Aug 2024 16:25:47 GMT

Hi all,

We have deployed an FTDv into Azure. We can ping the device and ssh to the device but unable to connect to the FDM via https.

When logging into the the FTD via ssh we see the below prompt:

cisco-tdv:~$

I am not sure how to configure the device from here in order to allow connections from web browser to FDM.

Any assistance would be much appreciated.

Thanks

Nick

Mark Elsen — Fri, 09 Aug 2024 10:31:45 GMT

- Check logs on the FTDv when trying https , check if anything related comes , if nothing is seen then check below :

Click Allow selected ports to view and choose the inbound ports to be opened for acess by the internet. Choose any of the following ports from the Select Inbound Ports drop-down list. By default, SSH (22) is selected. (take care!!) (only apparently)
- SSH (22)
- SFTunnel (8305)
- HTTPs (443)

MJHi — Fri, 09 Aug 2024 11:27:52 GMT

Hi,

Try to login using default admin/Admin123 via ssh and you should get wizard.

n-russell-biggie — Sun, 11 Aug 2024 11:08:23 GMT

That fixed it. Thank you very much