https://community.cisco.com/t5/network-security/nms-not-seeing-fpr1150/m-p/5161519#M1115104 <P><a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1541203">@bfrytm</a></P> <P>Are you running the FTD or ASA image on the FPR1150?</P> <P>If FTD, what interface are you attempting to connect to using SNMP? SNMP configuration supports Routed and Diagnostic interface only, not the management interface.</P> <P>If FTD, are you using FDM (inc via CDO) or FMC to manage the FTD?</P> <P>Please provide screenshots of your configuration.</P> Thu, 15 Aug 2024 18:43:50 GMT Rob Ingram 2024-08-15T18:43:50Z https://community.cisco.com/t5/network-security/nms-not-seeing-fpr1150/m-p/5161502#M1115103 <P>I am new to Cisco firewall products.</P><P>We are setting up a Network Management Solution.&nbsp; I can get SNMP data from the Cisco Switches on the same network, but cannot get the FPR1150 data.&nbsp; SNMPv3 is configured on the firewalls and in the NMS system.&nbsp; I can poll the switches but not the firewall.</P><P>Any suggestions are appreciated.</P> Thu, 15 Aug 2024 18:00:40 GMT https://community.cisco.com/t5/network-security/nms-not-seeing-fpr1150/m-p/5161502#M1115103 bfrytm 2024-08-15T18:00:40Z https://community.cisco.com/t5/network-security/nms-not-seeing-fpr1150/m-p/5161519#M1115104 <P><a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/1541203">@bfrytm</a></P> <P>Are you running the FTD or ASA image on the FPR1150?</P> <P>If FTD, what interface are you attempting to connect to using SNMP? SNMP configuration supports Routed and Diagnostic interface only, not the management interface.</P> <P>If FTD, are you using FDM (inc via CDO) or FMC to manage the FTD?</P> <P>Please provide screenshots of your configuration.</P> Thu, 15 Aug 2024 18:43:50 GMT https://community.cisco.com/t5/network-security/nms-not-seeing-fpr1150/m-p/5161519#M1115104 Rob Ingram 2024-08-15T18:43:50Z