ISE RADIUS dot1x authentication configure in EWC

Translator — Wed, 19 Feb 2025 23:20:22 GMT

Dear

I have question.

we need to configure ISE radius policy in EWC Controller AP for using users dot1x authentication.

Our AP information is like as below.

* model: C9115AXI-R

* OS : C9800-AP Software (C9800-AP-K9_IOSXE-UNIVERSALK9-M), Version 17.3.7

Is this version able to support dot1x authentication configuration function?

I tried to search but no any was confirmed correctly about this version.

If have information anything else, please share it.

Thank you,

Best Regards.

Re: ISE RADIUS dot1x authentication configure in EWC

Flavio Miranda — Wed, 19 Feb 2025 23:30:34 GMT

Yes, it supports.

In order to use dot1x is adding a Radius server to the WLC and then creating a SSID with WAP2 Enterpresive and 802.1x

All the information you need is on the following guide.