topic Re: transparent mode interrupts traffic in Network Security

transparent mode interrupts traffic

alexispino — Fri, 21 Feb 2025 15:44:56 GMT

In a configuration deployment, the 4125 device in transparent mode interrupts traffic.

Re: transparent mode interrupts traffic

MHM Cisco World — Fri, 21 Feb 2025 16:25:10 GMT

How you config it and how you know it interrupt traffic

MHM

Re: transparent mode interrupts traffic

alexispino — Fri, 21 Feb 2025 16:31:25 GMT

When sending a deployment in ftd-inline, traffic is interrupted and ftd inline stops providing services. version is 7.2.8

Re: transparent mode interrupts traffic

Sheraz.Salim — Sat, 22 Feb 2025 15:27:41 GMT

When deploying configurations on a FTD 4125 device in transparent mode/FTD inline mode running version 7.2.8 traffic interruption may occur due to several factors. These include Snort process restarts, hardware bypass switchover and specific configuration changes Here . The Snort process restart can briefly interrupt traffic inspection, with the impact varying depending on how the device handles traffic. To minimize disruptions, it is advisable to schedule deployments during low-traffic periods, carefully review changes before applying them, and consider using features like hardware bypass modules or failsafe options. If persistent issues occur reviewing logs and isolate the issue/s