topic Failed to configure SNMP on via Flexconfigure in Network Security

Failed to configure SNMP on via Flexconfigure

yuanqiao58820 — Tue, 11 Mar 2025 08:38:36 GMT

We have tried to configure SNMP via Flexconfig, but not able to deploy script.

shows:

The template is not valid.

Block list CLI error: snm-server host vdc x.x.x.x community xxx version 2c, snmp-server community xxx

The FTD version is 7.4.2.

nspasov — Tue, 11 Mar 2025 13:05:11 GMT

If you are using FDM (Firepower Device Manager) then the RestAPI link that you referenced would be applicable.

Thank you for rating helpful posts!

yuanqiao58820 — Tue, 11 Mar 2025 13:10:01 GMT

Thanks for this information.

The solution below is configure via FMC，which is not deployed. These FTD are managed by FDM now.

I have found a link with SNMP configure via rest API on FDM 6.7, just not sure whether it is suitable for FDM 7.4.2.

Marvin Rhoads — Tue, 11 Mar 2025 13:35:52 GMT

@yuanqiao58820 for FDM-managed devices, the API method remains the only method, even with the just-released version 7.7.

yuanqiao58820 — Thu, 13 Mar 2025 08:58:03 GMT

Thanks a lot, it works.