topic Re: FMT issue OSPF enabled error where there is no ospf config in Network Security

FMT issue OSPF enabled error where there is no ospf config

komiks — Wed, 17 Sep 2025 08:51:34 GMT

Hi!

I'm migrating ASA to FTD 3110. I got an issue during validation where "OSPF configuration already exists on the cisco FMC. Please disable OSPF on the FMC before proceeding with the migration." I am migrating a transparent mode FW and there is no ospf config on the ftd so there is no option to disable this on FMC.

have you encountered this issue?

Re: FMT issue OSPF enabled error where there is no ospf config

MHM Cisco World — Wed, 17 Sep 2025 10:09:17 GMT

As I know there is tab to enable/disable OSPF in FMC dis you check it?

MHM

Re: FMT issue OSPF enabled error where there is no ospf config

komiks — Wed, 17 Sep 2025 13:43:12 GMT

as per checking the option can be seen on the Device Managment->Device->Routing-OSPF. am I right? but on the FTD device there is no option for OSPF yet.

Re: FMT issue OSPF enabled error where there is no ospf config

MHM Cisco World — Wed, 17 Sep 2025 17:23:58 GMT

But ftd mgmt by fmc' and you confirm it disable'

Can i see message you get from FMT

""Managment->Device->Routing-OSPF. am I right? Totally right""

MHM

Re: FMT issue OSPF enabled error where there is no ospf config

Aref Alsouqi — Wed, 17 Sep 2025 17:08:00 GMT

Yes you're right, OSPF settings are in the device management > routing pane. I never came across this issue before, but it just come to mind that maybe you have OSPF enabled for another FTD on the FMC and that's why you get that error? I would suggest to work with TAC on this anyway.

Re: FMT issue OSPF enabled error where there is no ospf config

komiks — Wed, 17 Sep 2025 23:26:20 GMT

Here is the error.

Re: FMT issue OSPF enabled error where there is no ospf config

komiks — Wed, 17 Sep 2025 23:27:18 GMT

Yes, there is another ftd i migrated with ospf. I tried to unregister it to test, but still the issue appears.

Re: FMT issue OSPF enabled error where there is no ospf config

Aref Alsouqi — Thu, 18 Sep 2025 10:51:30 GMT

You don't have to unregister the other FTD, you could only try to disable OSPF and see if that would've done any difference. I would recommend to reach out to TAC and work with them on this as it doesn't make sense why the FMC should complain about OSPF when it's not related/required for the transparent FTD.