topic Re: FMC Object Management - added network objects not seen in Network Security

FMC Object Management - added network objects not seen

tmoore — Fri, 21 Feb 2020 16:08:03 GMT

Running FMC 6.2.3.3 with multiple domains with FTD 2100. Added network objects which are visible when scrolling through the object pages. But are not seen when using the search filter and entering the ip address or name. Nor are the new objects showing up when trying to add a Static Route. At the "Add Static Route Configuration" page the "Available Networks" does not show all the added Network Objects. I clicked the reload icon the amount doesn't change. How to I get these objects seen?

Re: FMC Object Management - added network objects not seen

jesusko — Mon, 19 Aug 2019 07:36:59 GMT

Did you find any solution for this problem? I have the same issue and so far no luck.
Thank you

Re: FMC Object Management - added network objects not seen

kvandegrift — Fri, 30 Aug 2019 20:15:27 GMT

We are seeing the same issue on FMC 6.2.3 but have not found a cause or solution. This problem has just appeared in the last week for us. Anyone have a possible explanation?

Re: FMC Object Management - added network objects not seen

jesusko — Sat, 31 Aug 2019 08:48:43 GMT

Hi,

Eventually I raised a TAC case and this was the solution from them:

# rm -r /var/opt/CSCOpx/MDC/search/
# pmtool restartbyid DCCSM

After this a web interface was showing ”System processes are starting, please wait” about 10 minutes and afterwards everything was working again and problem solved. I guess this is the bug CSCvp11760.

Re: FMC Object Management - added network objects not seen

Peter Beshay — Thu, 07 Nov 2024 18:28:37 GMT

these 2 commands work for 7.4.0.118 but the problem i have to do that every time i add object
is there a permanent fix or just this work around

Re: FMC Object Management - added network objects not seen

Peter Beshay — Thu, 14 Nov 2024 17:32:18 GMT

I upgraded the FMC2700 to version 7.4.2.1-30 and the issue still exist , do any one have this issue and resolve it some how?

Re: FMC Object Management - added network objects not seen

aallahbahsh — Thu, 05 Dec 2024 10:56:46 GMT

I have FMC Version 7.4.2 (build 172) virtual, cannot find the objects when I search them. Any solution?

Re: FMC Object Management - added network objects not seen

Thiruchelvam Thurairaj — Wed, 11 Dec 2024 15:11:36 GMT

After updating the Firewall Management Center to 7.4.2.1 (objects were stiil not visible) and did the same as Jesuso proposed (CLI commandos), now I see the network objects under Object Management. And also if I create new objects they are visible under the object management.

If it will stay like this I don't have a clue!

Time will tell.

Re: FMC Object Management - added network objects not seen

Peter Beshay — Wed, 11 Dec 2024 15:20:35 GMT

For me, any new objects I create, I must execute the CLI commands, or they will not show up or be usable in firewall access rules.

The TAC support has not been able to fix it till now.

Re: FMC Object Management - added network objects not seen

Thiruchelvam Thurairaj — Thu, 12 Dec 2024 15:44:55 GMT

Hi,

I have tested it just now.

When I have creatd an object directly under a access-control rule or via Object Management, object is still visible for me. 7.4.2.1 is the version I am using for the FMC and CSFW's.

Re: FMC Object Management - added network objects not seen

Peter Beshay — Thu, 12 Dec 2024 15:59:18 GMT

both, for me, are not working, I did full reboot as well with the same result

Re: FMC Object Management - added network objects not seen

vincentyore — Wed, 14 May 2025 15:04:58 GMT

I have same issue with 7.4.2.2 any fixes

Re: FMC Object Management - added network objects not seen

Peter Beshay — Wed, 14 May 2025 16:26:19 GMT

Based on TAC support, this was only fixed on release 7.6.x which is not a stable version yet.
still using the workaround until they get that stable release on Version 7.6.x
# rm -r /var/opt/CSCOpx/MDC/search/
# pmtool restartbyid DCCSM

Re: FMC Object Management - added network objects not seen

vincentyore — Tue, 20 May 2025 12:24:39 GMT

Thanks Peter I was going to raise a TAC call on this but probably no point now as they are aware and will tell me to do the same.

Re: FMC Object Management - added network objects not seen

Marvin Rhoads — Tue, 20 May 2025 14:29:51 GMT

@Peter Beshay 7.6 is stable, it just is not the "Suggested Release" for general purpose as of right now. I have 20 customers running 7.6 across use cases from a few small 1010s up through 6-unit 9300 clusters with 100 Gbps interfaces and it runs quite well.

Re: FMC Object Management - added network objects not seen

TL13460 — Thu, 11 Dec 2025 17:01:46 GMT

This issue is still seen in 7.6.2.1. Using the work around commands above still works as well.

Re: FMC Object Management - added network objects not seen

bkastor — Fri, 09 Jan 2026 18:55:32 GMT

Just hit this. Took me _several_ times to realize the stuff I was putting in wasn't sticking! 😉

This FMC is 7.7.11 and is managing a pair of 2100's running 7.4.3 and an Azure instance running 7.6.3